Tilt & Turn Window Screen M36 - Vertical Pull

Width(in): Height(in):

2. OPTIONS:

Mounting:
  • (Inside )- means the screen is mounted on the inside of the frame or recess.
  • (Surface)- means the screen is mounted on the face of the frame.

  • Options:
  • MAC (Measure and Cut) You will have to do the Final Cutting to make it Fit.
  • RTI (Ready To Install) it is Fully Finished & Assembled to the sizes you have entered less 1/16 of inch.

  • Pull_Bar_Stiffener:
  • Use Pull Bar Stiffener After 96" Wide



  • Colour:


    Product Description

    Retractable Window Screens M36 Vertical Pull Measurements: 

    12" - 185" W  by 6" - 50"

    Bravo manufactures custom vertical pull down retractable screens for tilt and turn windows. These screens are of the highest quality and will not detract from the profile of your beautiful tilt and turn windows. 

    These screens provide you with 100% insect protection so no bugs or insects will get in if you have your windows open. The  screen mesh is available in standard durable insect screen mesh and solar coated insect screen mesh. The solar coated fabrics will block up to 65% of the sun's harmful rays, heat and glare. So your rooms stay cooler and you are able to watch TV or view your computer screen without glare getting in the way.

    Retractable screens are ideal for all window types because when they are not in use or needed, they will roll up or retract back into their cassette housing, out of sight. This means that there is no more removing screens in the winter or when you need to clean or maintain your windows. You can just retract them into their cassette.

    An important point is that when they are retracted, they will not slam! Unlike other screens out there, they are quiet and retract smoothly.

    Several colors are available for your aluminum frame for your screen. This is to ensure that your screen's frame will match or blend seamlessly with the widnow frame and gives the appearance that it is a part of the window.

    For more pictures see the Gallery

    How to Measure

    1. Use a steel measuring tape & Measure to the nearest eighth of an inch - don't round your measurements.

    2. Reversing width and height when measuring. Width is the side-to-side measurement. Height is the top-to-bottom measurement. The width is always given before the height of the Door or window. For example, an order 48 x 72 would be manufactured 48 inches wide by 72 inches high. To avoid confusion, as you measure put a W next to width measurement and an H by the height measurement.

    3. Not checking the measurements in three places on both the width and height of the door or window will cause in the wrong size. Use a ladder or stool to reach the top of high windows. Many windows are not square, so the width should be measured at the top, in the middle and at the bottom. Also check the height of the window in the middle and at both sides. When placing your order use the smallest size of the three measurements.

    4. Not allowing for obstructions that will hamper the operation of the blind. The most common obstructions are inside the window frame are window cranks and handles. We can provide fold down window cranks for most windows.

    Ordering from someone else. Bravoblinds.com has the right products for you. Inside measurement is always on the Inside of the Frame. Outside measurement is always from outside of Moulding to outside of Moulding.

    Unfortunately your browser does not hava JavaScript capabilities which are required to exploit full functionality of our site. This could be the result of two possible scenarios:

    1. You are using an old web browser, in which case you should upgrade it to a newer version. We recommend the latest version of Firefox.
    2. You have disabled JavaScript in you browser, in which case you will have to enable it to properly use our site. Information on enabling JavaScript.
    Free Sample
    Group: 1 - 18x16 Standard Insect Screen - 1378
    Free Sample
    Group: 2 - 20x30 Solar Insect Mesh - 1379